ZT1017952X

Manufacturers :Fluke

Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter. The TL224 SureGrip Insulated Test leads offer reinforced strain relief and includes banana jack termination for a variety of test lead configurations. SureGrip accessories are designed to improve steadiness in slippery hands. Rubber over molded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement. - DMM test leads (red, black) with safety shrouded, standard diameter banana plugs - Right angle connector on one end and straight connector on the other - Reinforced strain relief - 1.5 meter silicone-insulated wire resists heat and cold - CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed - One year warranty

ZT1015374X

Manufacturers :Moore & Wright

Accurately milled for checking internal and external thread forms.

ZT1043758P

Manufacturers :Moore & Wright

Accurately milled for checking internal and external thread forms.

ZT1017100X

Manufacturers :Mitutoyo

Series 192 Two measuring modes, ABS (absolute) and INC (incremental), for increased inspection efficiency. Rigid construction ensures repeatable measurements. Six digit lcd display and a minus sign. Provided with data output port for SPC. Preset and zero setting (abs/inc), preset value memory (abs), data hold, coarse/fine feed switching, error alarm and low battery alarm. Power supply: battery 1x CR2032 supplied. All models listed below have data output facility, except for model 192-630. Resolution: 0.01mm/0.0005"

ZT1017884X

Manufacturers :Amprobe

Voltage, current and resistance measurement. Diode and acoustic continuity test. Logic test function (TTL). Automatic and manual range selection. Integrated measurement memory (data hold). Shock-proof and impact-resistant thanks to standard protective holster. Auto power-off. Non-contact voltage detection (NCV). Magnetic holster (Magne-Grip).

ZT1017963X

Manufacturers :Megger

Digital or Analogue: The Megger MIT300, MIT310 and MIT320 all feature the popular Megger digital/analogue display. Large 20mm high characters provide very clear readout, combined with an analogue arc for the feel of an analogue instrument, with a true analogue response. Tough:- Designed to take the bashing that testers receive on site, the Megger MIT insulation testers are rubber armoured. The rigid display cover folds right out of the way during testing and locks down to protect the display when it is finished. Simple to use:- No buried functions mean it is obvious how to use the Megger MIT. Colour coded ranges help test selection, reducing testing time and help with fault location. A user guide in the lid provides all the basic information. Hands free use:- It hangs comfortably around the neck for hands-free use because the instrument is carefully balanced. Continuity and buzzer testing starts automatically on connection to the circuit. Insulation tests being activated from the instrument or the switch probe, supplied with MIT320 and MIT330 (not suitable for the use with the MIT300 or MIT310).

ZT1017962X

Manufacturers :Megger

Digital or Analogue: The Megger MIT300, MIT310 and MIT320 all feature the popular Megger digital/analogue display. Large 20mm high characters provide very clear readout, combined with an analogue arc for the feel of an analogue instrument, with a true analogue response. Tough:- Designed to take the bashing that testers receive on site, the Megger MIT insulation testers are rubber armoured. The rigid display cover folds right out of the way during testing and locks down to protect the display when it is finished. Simple to use:- No buried functions mean it is obvious how to use the Megger MIT. Colour coded ranges help test selection, reducing testing time and help with fault location. A user guide in the lid provides all the basic information. Hands free use:- It hangs comfortably around the neck for hands-free use because the instrument is carefully balanced. Continuity and buzzer testing starts automatically on connection to the circuit. Insulation tests being activated from the instrument or the switch probe, supplied with MIT320 and MIT330 (not suitable for the use with the MIT300 or MIT310).

ZT1017842X

Manufacturers :Fluke

The 561 IR and contact thermometer, combines the temperature measurement functions that industrial, electrical, and HVAC/R professionals need, all in one tool. It measures both infrared and contact temperature, replacing several other test tools. It's fast, efficient, and easy to use, saving you valuable time and effort. Temperature Range: -40 to 550 C (-40 to 1022 F) Accuracy: 1.0 % of reading 1 % of reading or 1 C (2 F), whichever is greater below 0 C/32 F, 1 C (2 F) 0.1/1 D/S ratio: 12:1 Emissivity: Adjustable with three settings Low (0.3), Medium (0.7). High (0.95) Power Source: 2 AA batteries (alkaline or NiCD)

ZT3140205S

Manufacturers :C.K Tools

ST Tape 8M by Ck

ZT1017777X

Manufacturers :Fluke