Products
Distributors
Manufacturers
- Intel
- Samsung
- Texas Instruments
- STMicroelectronics
- Infineon
- NXP Semiconductors
- Microchip
- Analog Devices
- onsemi
- Skyworks Solutions
- Avago
- Marvell
- Omnivision Technologies
- ROHM
- Seoul Semiconductor
- Silego
- Cirrus Logic
- Silicon Labs
- Lattice Semiconductor
- Cypress Semiconductor
- Toshiba
- Mitsubishi
- Panasonic
- Sharp
- Omnetics
- Laird
- TDK-Lambda
- WAGO
- All Distributors
ZT1016385X
Manufacturers :Mitutoyo
The ABS AOS caliper has no limit to response speed and allows you to take reliable measurements. This caliper comes complete with the same AOS (Advanced Onsite Sensor) induction type encoder used in top-of-the-line ABS coolant-proof calipers. Features and Benefits The ABS (ABSOLUTE) scale requires no origin setting after power-on The slider has been manufactured to provide a comfortable, smooth and stable operation High contrast LCD with 9mm character height to alleviate fatigue Electromagnetic induction type ABS encoder allows this caliper to be used without the concern for contamination on the scale face during measurement The detection signal is still reliable when dirty Long battery life
ZT1017101X
Manufacturers :Mitutoyo
Series 192 Two measuring modes, ABS (absolute) and INC (incremental), for increased inspection efficiency. Rigid construction ensures repeatable measurements. Six digit lcd display and a minus sign. Provided with data output port for SPC. Preset and zero setting (abs/inc), preset value memory (abs), data hold, coarse/fine feed switching, error alarm and low battery alarm. Power supply: battery 1x CR2032 supplied. All models listed below have data output facility, except for model 192-630. Resolution: 0.01mm/0.0005"
ZT1025777P
Manufacturers :Mitutoyo
40mm Diameter Face Large dial face for easy reading with the installed 2mm (.08") diameter point carbide tipped. These indicators are ruggedly housed within a satin chrome finished case. Bezel and dial are adjustable for easy zero setting with fully jewelled movements. Automatic reversible contact point is adjustable through 240. The precision miniature pivot bearings give a frictionless movement of the contact point. One piece bezel of crystal design ensures resistance to water and dust.
ZT1263572S
Manufacturers :Hanna Instruments
Calibration Solution pH 7.01
ZT1016855X
Manufacturers :Mitutoyo
The extended caliper type jaws, made of high grade tool steel for long life, enable easy entry into the component to be measured. Clear, crisp graduations on the satin chrome finish sleeve and thimble are in the reverse direction to ensure direct reading of the measurement. Easy wear adjustment. Easily adjusted for side movement of sliding jaw. Spanner wrench supplied with every micrometer. Satin chrome finished frame. Accuracy: Instrument Error: 5-30mm 5m, 25-50mm 6m, 50-75mm 7m, 75-100mm 5m.
ZT1044378P
Manufacturers :Mitutoyo
The extended caliper type jaws, made of high grade tool steel for long life, enable easy entry into the component to be measured. Clear, crisp graduations on the satin chrome finish sleeve and thimble are in the reverse direction to ensure direct reading of the measurement. Easy wear adjustment. Easily adjusted for side movement of sliding jaw. Spanner wrench supplied with every micrometer. Satin chrome finished frame. Accuracy: Instrument Error: 5-30mm 5m, 25-50mm 6m, 50-75mm 7m, 75-100mm 5m.
ZT3300756S
Manufacturers :Mitutoyo
201-153 Dial Snap Gauge by Mitutoyo
ZT1415292X
Manufacturers :Mitutoyo
39mm Diameter Face Large dial face for easy reading with the installed 2mm (.08") diameter point carbide tipped. These indicators are ruggedly housed within a satin chrome finished case. Bezel and dial are adjustable for easy zero setting with fully jewelled movements. Automatic reversible contact point is adjustable through 240. The precision miniature pivot bearings give a frictionless movement of the contact point. One piece bezel of crystal design ensures resistance to water and dust. Clock Only
ZT3300820S
Manufacturers :Mitutoyo
572-213-10 Digimatic Scale Unit by Mitutoyo
ZT1017371X
Manufacturers :Mitutoyo
Flexible magnetic stand with precision smooth segments linked by a steel cable. Locked in position by lever at the bottom of base. On/off lever releases magnet. Suitable for stem diameter 6 and 8mm. Column: 16mm dia. x 335mm.
- 1
- 2
- 3
- 4
- 100