HFE4091-341

Manufacturers :Finisar

These products are high-performance 850nm VCSELs (Vertical Cavity Surface-Emitting Lasers) designed for high-speed data communications and packaged with a custom designed power monitor diode. The power monitor diode can be used with appropriate feedback control circuitry to set a maximum power level for the VCSEL. These combined features simplify design for high data rate communication and eye safety.

HFE4093-332

Manufacturers :Finisar

The HFE409x-332 is a high radiance VCSEL designed to convert electrical current into optical power that can be used in fiber optic communications and other applications. As the current varies above threshold, the light intensity increases proportionally. The HFE409x-332 is designed to be used with inexpensive silicon or gallium arsenide detectors, but excellent performance can also be achieved with some indium gallium arsenide detectors.

HFD7180-001

Manufacturers :Finisar

HFD3180-108

Manufacturers :Finisar

The HFD3180-108 use a high-performance GaAs PIN photo-detector packaged with a transimpedance amplifier designed to meet performance requirements for data rates up to 2.5Gbps data communication over multimode optical fiber at 850nm. Applications include Ethernet, Fiber Channel and ATM protocols. The optical assembly is designed to interface either 50µm or 62.5µm multi-mode fiber.

FWSF-CHASSIS-2

Manufacturers :Finisar

The Finisar FWSF-CHASSIS-2 is a standard 1RU 19” rack chassis which provides simple installation for plug-in modules and the chassis can accommodate up to two plug-in modules. This chassis-based system allows network equipment manufacturers a more scalable and higher-density solution to add WDM capability to their existing and new networks.

HFD3141-203

Manufacturers :Finisar

The HFD3141-203 use a high-performance InGaAs PIN photo-detector packaged with a transimpedance amplifier designed to meet performance requirements for data rates up to 4.25Gbps data communication over single-mode optical fiber at 1200nm to 1600nm. Applications include Ethernet, Fiber Channel and ATM protocols.

DFB-1310-10LR-LCA

Manufacturers :Finisar

The DFB-1310-10LR-LCA is specifically designed for applications based on several optical communications standards, including IEEE 10GBASE-LR, STM64, STM64 FEC, 10GFC, 10G GbE, 10G GbE FEC and 10GFC FEC. Excellent optical performance is achieved by matching the electrical characteristics of the TOSA and laser to the external circuitry. The TOSA is designed to be paired with the 10G LR ROSA PIN-1310-LR-x.

HFD3081-108

Manufacturers :Finisar

The HFD3081-108 use a high-performance GaAs PIN photo-detector packaged with a transimpedance amplifier designed to meet performance requirements for data rates up to 2.5Gbps data communication over multi-mode optical fiber at 850nm. Applications include Ethernet, Fiber Channel and ATM protocols.

HFE4083-322

Manufacturers :Finisar

The HFE408x-322 is a high radiance VCSEL designed to convert electrical current into optical power that can be used in fiber opticcommunications and other applications. As the current varies above threshold, the light intensity increases proportionally. The HFE408x-322 is designed to be used with inexpensive silicon or gallium arsenide detectors, but excellent performance can also be achieved with some indium gallium arsenide detectors.

FTLF1621P1BCL

Manufacturers :Finisar

Finisar's FTLF1621P1xCL Small Form Factor Pluggable (SFP) optical transceivers are compatible with the SFP Multi-Sourcing Agreement (MSA). They comply with SONET OC-48 LR-2 (SDH STM L-16.2) standards, Gigabit Ethernet as specified in IEEE Std 802.3 and Fibre Channel FC-PI 13.0. They are compatible with SONET OC-12 SR and SONET OC-3 standards. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA.