Products
Distributors
Manufacturers
- Intel
- Samsung
- Texas Instruments
- STMicroelectronics
- Infineon
- NXP Semiconductors
- Microchip
- Analog Devices
- onsemi
- Skyworks Solutions
- Avago
- Marvell
- Omnivision Technologies
- ROHM
- Seoul Semiconductor
- Silego
- Cirrus Logic
- Silicon Labs
- Lattice Semiconductor
- Cypress Semiconductor
- Toshiba
- Mitsubishi
- Panasonic
- Sharp
- Omnetics
- Laird
- TDK-Lambda
- WAGO
- All Distributors
Adafruit Industries
Visit SiteADA368
Manufacturers :Adafruit Industries
If you need to connect a DC power wall wart to a board that doesn't have a DC jack - this adapter will come in very handy! There is a 2.1mm DC jack on one end, and a screw terminal block on the other. The terminals are labeled with positive/negative assuming a positive-tip configuration (which is the most common)
ADA1800
Manufacturers :Adafruit Industries
ADA1826
Manufacturers :Adafruit Industries
ADA1389
Manufacturers :Adafruit Industries
Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY USB shells are available in USB A plug, micro B, mini B and USB A socket. Each shell comes with a two-part snap plastic shell and a proper connector with easy-to-solder tabs. USB DIY Connector Shell - Type Mini-B Plug (459)
ADA1388
Manufacturers :Adafruit Industries
Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY USB shells are available in USB A plug, micro B, mini B and USB A socket. Each shell comes with a two-part snap plastic shell and a proper connector with easy-to-solder tabs. USB DIY Connector Shell - Type A Socket (459)
ADA3122
Manufacturers :Adafruit Industries
ADA3124
Manufacturers :Adafruit Industries
ADA1387
Manufacturers :Adafruit Industries
Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY USB shells are available in USB A plug, micro B, mini B and USB A socket. Each shell comes with a two-part snap plastic shell and a proper connector with easy-to-solder tabs. USB DIY Connector Shell - Type A Male Plug (313)
ADA1390
Manufacturers :Adafruit Industries
Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY USB shells are available in USB A plug, micro B, mini B and USB A socket. Each shell comes with a two-part snap plastic shell and a proper connector with easy-to-solder tabs. USB DIY Connector Shell - Type Micro-B Plug (313)
ADA3118
Manufacturers :Adafruit Industries
- 1
- 2
- 3
- 4